The Fomalhaut watch features a steel case with a 12-sided bezel, secured by four screws. Its dial is divided into two levels, with cut indexes on the upper level and super-luminous indexes on the lower level. The dial is protected by a convex lenticular sapphire. This timepiece is powered by a custom Swiss-made movement, specially designed by Nazareno Rossetti and crafted by skilled Swiss Masters. It represents a combination of Italian style and Swiss precision. A few basic rules must be followed and remembered for the proper functioning of your automatic watch. Remember to wind your watch every time it stops: with the crown unscrewed in position (0), wind the watch by turning the crown clockwise approximately 20 times. This will wind the mainspring of the movement, while the oscillating weight will continue to wind it when worn, keeping it running. The watch has a power reserve of approximately 41 hours. Please also note that an automatic watch is still a mechanical watch, that it has a 24-hour tolerance of + or - 5/10 seconds and that long-term non-use may require adjustment by experienced and authorized personnel. WARNING: Avoid changing the date when the hands are between 10 PM and 2 AM, as this may damage the mechanism. Do not operate the crown when the watch is wet. Make sure that the crown is always screwed in tightly. Avoid violent impacts (e. g. diving) or very humid environments (e. g. sauna). Immediately after immersing the watch in salt water, wash it with fresh water and then dry it. Do not expose the watch to high temperatures (above 60°C / 140°F) for prolonged periods. Avoid contact with perfumes, gasoline, solvents and other similar substances. To ensure the longevity of your watch, we recommend that you have the gaskets checked by a qualified technician every 2 years.